Printer Menu System
Menu Items Selections Explanation
C. None
Press the [Enter]
button to select this
item.
This item disables the Feeder Signal option.
D. On /Off
Control
Press the [Enter]
button to select this
item.
This item activates the feeder whenever one or more
records are in the buffer to be printed.
The feeder is turned off once the last record in the
buffer is being printed. Note: The feeder will also be
turned off when a “Early Feed Error” occurs while
the Stop On Feed Err (Error) option is on.
E. Pulse Off
Signal
Press the [Enter]
button to select this
item.
This item turns off the feeder when the sensor
detects the piece to print the last record in the buffer.
The feeder is turned off once the sensor
detects the piece to print the last record in the buffer.
The feeder is then turned off a second later. Note:
The feeder is turned off when an “Early Feed Error”
occurs while the Stop On Feed Err (Error) option is
enabled.
If the Pulse Off Signal option is selected, the
external feeder signal will be asserted when the
leading edge of the envelope for the last address to
be printed is detected at the print heads or when an
early feed error is detected (if the Stop On Feed Err
option has been selected). In either case, the signal
will be cleared 1 second later.
3. LINES PER ADDRESS
Set the number of lines of text the record will consist of when printing onto the media.
Menu Items Selections Explanation
1 to 66
Set the number of lines to match the number of lines
in a record that will be sent to the printer.
4. LINE TERMINATION
This item allows the printer to interpret what the Line Termination (end of a line of text) is for
different operating systems or software. Choose from the various Line Termination formats to
get the correct line count and then the record will print correctly.
Menu Items Selections Explanation
User’s Manual - Revision C Section 6 - 11
To Next Page
