1
2
3
4
NU750_2_G4-FRA.qxd 25/07/05 9:52 Page 4.02
4.02
BONNET
Opening
Pull control 1 towards you.
Lift the bonnet and release stay 3
from its holder 2. For your own
safety, it is very important to fix the
stay into retainer 4.
Closing
Release the stay and replace it in its
holder 2.
Lower the bonnet and release it
when it is about 20 cm above its
closed position. It will lock under its
own weight.
As a safety measure, check that the
bonnet is fully locked by trying to
lift it.
Before closing the bonnet, check to
make sure that nothing has been left
in the engine compartment.
Check that it is correctly
locked.
Take care when working in
the engine compartment as
the engine cooling fan may
start to operate at any
moment without warning.
NU750_2_G4-ENG.qxp 9/7/2005 5:20 PM Page 4.02 (Black plate)
To Next Page
Loading...
Need help?
General
