1
3
2
4
5
6
NU750_2_G1-FRA.qxd 28/07/05 13:22 Page 1.21
1.21
PARTITION
Using the swivelling bulkhead
- Bring the front passenger seat base
into a vertical position by pulling it
past the point of resistance (arrow).
- Unlock the seatback by raising the
handle 1 and push it into a
horizontal position after lowering
the headrest. Press the top of the
headrest to make the operation
easier. It is hinged.
Label 2 reminds you of these
instructions.
- Release the swivelling section by
lifting catch 6 until it locks in
position.
- Pivot the moving section until it is
at right angles and lock it at point 4
by lowering catch 6.
Note: before returning the
swivelling section to its original
position, make sure that locking
point 5 is not obstructed.
Follow the safety
instructions on label 3.
The swivelling bulkhead
section must always be
locked when the vehicle
is driven.
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.21 (Black plate)
To Next Page
Loading...
