1
2
NU750_2_G1-FRA.qxd 28/07/05 13:22 Page 1.83
1.83
EXTERNAL LIGHTING AND SIGNALS
u
Side lights
Turn the end of stalk 1 until
the symbol is opposite mark 2.
m
Dipped beam headlights
Turn the end of stalk 1 until
the symbol is opposite mark 2.
An indicator light on the instrument
panel comes on.
o
Main beam headlights
With stalk 1 in the dipped
beam position, pull the stalk
towards you.
When the main beam headlights are
lit, an indicator light lights up on
the instrument panel.
To return to the dipped headlight
position, pull the stalk towards you.
e
Switching off the lights
Turn the end of stalk 1 back
to its original position.
Lights-on reminder buzzer
When a door is opened a buzzer will
sound to warn you that the lights are
still switched on after the ignition
has been switched off (to prevent
discharge of the battery, etc.).
Before driving at night, check that the electrical equipment is
operating correctly and adjust the headlight beams (if your vehicle
is not carrying its normal load). In general, check that the lights are
not obscured (by dirt, mud, snow or objects which could cover
them).
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.83 (Black plate)
To Next Page
Loading...
