1
4
6
5
2
3
NU750_2_G1-FRA.qxd 28/07/05 13:22 Page 1.44
1.44
CHILD SAFETY (continued)
Fitting a child seat
- For information on fitting and
using the seat, read the
instructions provided carefully.
- The front seats must not be moved
back beyond the halfway point on
the seat runners and the seatback
must be in an upright position.
- Position the guides 2 (supplied
with the seat) in the openings
provided in the seat base.
- Offer up seat catches 3 opposite the
two rings 1 which are fitted to the
vehicle rear centre seats.
- Latch the hooks onto the rings and
make sure they are securely locked
(by moving them forwards and
backwards and from left to right).
- Push on the base of the seat firmly
to bring the child seat into contact
with the seatback and make sure it
is securely in position.
When the seat is in the rear facing
position, use strap 4 supplied with
the seat. Insert hook 5 into hole 6.
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.44 (Black plate)
To Next Page
Loading...
