1
2
NU750_2_G1-FRA.qxd 28/07/05 13:23 Page 1.86
1.86
REAR SCREEN WASHER/WIPER
e
Rear screen wiper with
timer
With the ignition on, turn the
end of stalk 1 to align mark 2
opposite the symbol.
k
Rear screen wash/wipe
With the ignition on, turn the
end of stalk 1 to align mark 2
opposite the symbol.
When the stalk is released, it returns
to the rear wipe position.
Before using the rear wiper, check
that no transported object can
obstruct the travel of the blade.
In frosty weather, make sure that
the wiper blades are not stuck by
ice (to avoid the risk of the motor
overheating).
Keep an eye on the condition of the
blades. Replace the wiper blades as
soon as they begin to lose
efficiency (approximately once a
year).
Regularly clean your rear screen.
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.86 (Black plate)
To Next Page
Loading...
Need help?
General
