Renault zoe - Page 24

1.18
ENG_UD35289_5
Véhicule électrique : programmation de la charge (X10 - Renault)
Charge start
Charging starts at the set time:
– if the ignition is switched off;
– The gear lever should be in posi-
tion P;
– if the vehicle is connected to a power
supply.
El ECTri C vEhiCl E: charging programming (2/2)
On the instrument panel 2
(depending on the vehicle)
Programming the function start time
You can programme a single time.
– briefly press button C or D to access
the menu “PROGRAMMING”;
– press and hold button C or D to con-
firm;
– briefly press button C or D to access
the menu “SETTINGSSTART
LOAD”;
– press and hold button C or D to con-
firm;
– briefly press button C or D to access
the clock settings;
– hold down button C or D - the hours
flash;
– press buttons C and D to set the
hour;
– hold down button C or D to confirm
the hour setting;
– the minutes flash - press buttons C
and D to set the minutes;
– hold down button C or D to confirm
the minutes setting. Your settings are
now saved.
NB: When the programming is con-
firmed, the warning light
 comes
on on the instrument panel.
2
C
D