Renesas RA4 Series - Figure 20. Saving the Configuration Changes; Figure 21. Building the Project; Figure 22. Successful Build Output

Renesas RA Family EK-RA4M2 – Quick Start Guide
R20QS0018EG0100 Rev.1.00 Page 24 of 29
Jan.04.21
3. After the desired modifications are made, click Generate Project. A dialog box may appear with an
option of saving the configuration changes. Click Proceed.
Figure 20. Saving the Configuration Changes
4. Modify the source files in the /src folder as needed and save the changes.
5. Build the project by clicking the build icon.
Figure 21. Building the Project
6. A successful build produces an output as follows.
Figure 22. Successful Build Output