RH850/U2A 292pin 7. Connectors
R20UT4545ED0102 Rev.1.02 Page 30 of 58
May 27, 2021
7. Connectors
7.1 Connectors to the Main Board CN1 to CN3
Three connectors (CN1 to CN3) are available to connect the piggyback board to a Main Board.
The signals of each connector are summarized in the following tables.
Note
Regarding the function on the Main Board, please refer to the User's Manual of any supported Main Board.
Refer to 1.2 Supported Main Boards for a list of supported Main Boards.
7.1.1 Main Board Connector CN1