RSKRX220 4. Building the Tutorial Program
R20UT2194EG0100 Rev. 1.00 Page 17 of 27
Jul 3, 2013
4.3 Saving Project Settings
If you have changed any project settings
this is a good time to save the project.
• Select ‘File’ | ‘Save Project’.
If you make any changes to files in CubeSuite+ and want
to preserve these change, you can save them by:
• Select ‘File’ | ‘Save All’.
You can also save files by clicking the ‘Save’ or ‘Save All’
buttons from the CubeSuite+ toolbar.
In addition files can be saved using the keyboard
shortcut [Ctrl + S]:
To Next Page
Loading...
