EN
Dry Trimming
A raising of plaster dust in aerodynamic dead areas when dry trimming is normal and has no neg-
ative inuence on the function or grinding power of the MTplus.
⇒ Remove dust using a dry brush or towel or vacuum it clean.
Spare Parts
You can nd components subject to wear and the spare parts on the spare part
list in the internet at www.renfert.com/p918.
Enter the following item number: 18030000 or 18030500.
The components excluded from the warranty (such as consumables or parts sub-
ject to wear and tear) are marked on the spare part list.
Serial number and date of manufacturing are shown on the type plate of the unit.
Disposal Information
Within the European Union, units with this symbol should not therefore be disposed of in unsort-
ed domestic waste.
Please contact your local authorities for more information on proper disposal.
Subject to change
- 4 -
To Next Page
Loading...
