To Next Page
J
Joshua WilsonAug 3, 2025
What to do if Renishaw PH20 servos are off?
- SSusan KempAug 3, 2025
If the servos are off, check the power supply. Also, inspect for any software errors.
What to do if Renishaw PH20 servos are off?
If the servos are off, check the power supply. Also, inspect for any software errors.
What to do if Renishaw PH20 probe LED is off?
If the probe LED is off, check for power supply issues. Also, ensure the probe is not triggered or the module is not removed.
What to do if Renishaw PH20 Industrial Equipment is in soft engage mode?
If the equipment is in soft engage mode, manually rotate the PH20 head to prevent damage.
What to do if Renishaw Industrial Equipment probe is inhibited?
If the probe is inhibited, check the system settings. Also, ensure that the probe is properly engaged.
What to do if Renishaw PH20 Industrial Equipment has power but no communications?
If there is power but no communications, verify the connection to the communication interface.
General| Storage Temperature | -20°C to 70°C |
|---|---|
| Type | Probe head |
| Compatibility | Renishaw probe systems |
| Sensing Technology | Touch-trigger |
| Maximum Speed | 200 mm/s |
| Interface | Renishaw probe interface |
