Renkforce RF-CA-240 - Page 12

• Mixed fraction Improper fraction conversion
• Example:
• You can use the display setup (Disp) screen to specify the display format when a fraction
calculation result is greater than one.
• To change the fraction display format, press the A key a number of times until you reach the
setup screen shown below.
• Display the selection screen.
• Press the number key ( or ) that corresponds to the setting you want to use.
Mixedfraction
Improper fraction
• Anerroroccursifyoutrytoinputamixedfractionwhilethed/cdisplayformatisselected.
 Percentage calculations
• Example 1: To calculate 12% of 1500 (180)
• Example 2: To calculate what percentage of 880 is 660
12