Renkforce RF-CA-240 - Page 15

 Answer memory
• Whenever you press  after inputting values or an expression, the calculated result
automatically updates Auswer Memory contents by storing the result.
• In addition to , Answer Memory contents are also updated with result whenever you press
, , or followed by a letter (A through F, or M, X, or Y).
• You can recall Answer memory contents by pressing .
• Answermemorycanstoreupto12digitsforthemantissaandtwodigitsfortheexponent.
• Answer memory contents are not updated if the operation performed by any of the above key
operations results in an error.
 Consecutive calculations
• A calculation result produced by pressing canbeusedinthenextcalculation.
• The result of a calculation can also be used with a sub sequent Type A function
.
 Independent memory
• Values can be input directly into memory, added to memory, or subtracted from memory.
lndependent memory is convenient for calculating cumulative totals.
• Independent memory uses the same memory area as variable M.
• To clear independent memory (M), input .
• Example:
 Variables
• There are nine variables (A through F,M,X and Y), which can be used to store
data,constants,results and other values.
• Use the following operation to delete data assigned to a particular variable:
. This operation deletes the data assigned to variable A.
• Perform the following key operation when you want to clear the values assigned to all of the
variables.
15