Need help?Do you have a question about the Renogy 200W and is the answer not in the manual?
General| Maximum Power Output | 200W |
|---|---|
| Cell Type | Monocrystalline |
| Weight | 26.5 lbs |
| Module Efficiency | 21% |
| Maximum System Voltage | 600V DC |
| Operating Temperature | -40°F to 185°F |
| Warranty | 25 years |
| Cable Length | 35.4 inches (900mm) |
General safety guidelines for installation and operation of the charge controller, emphasizing reading instructions and avoiding water ingress.
Specific safety precautions for handling and charging lead-acid batteries, including ventilation and terminal protection.
Highlights key features of the solar suitcase system, including LCD display, charging stages, and protections.
Describes the Bulk Charge stage, used for daily charging, utilizing 100% of solar power for rapid battery recharge.
Explains the Boost Charge stage, an absorption phase with constant voltage regulation to prevent heating and gassing.
Provides steps to resolve issues like battery over/under voltage and lack of charging.
Details routine tasks for maintaining optimal performance of the charge controller and system.
Lists technical details for 100W and 200W panels, including power, voltage, current, and dimensions.
Details specifications for the charge controller, such as nominal voltage, current rating, and operating temperature.
Table comparing charging parameters (voltage, duration) for GEL, SEALED, and FLOODED batteries.
Defines key charging parameters like High Volt Disconnect, Charging Limit Voltage, and Equalization Voltage.
To Next Page
