01
Warning
Battery Safety
General Information
Please read this guide carefully to avoid incorrect connections that can cause the battery
monitor to malfunction and/or create a fire hazard. Disconnect the negative pole of the
battery before installation.
The Renogy Battery Monitor is a high precision device (also known as coulometer),
which can test the voltage, current, and capacity of a battery to help users know the
state of charge at any time. The Renogy Battery Monitor has a memory function which
allows users to set a low voltage capacity alarm. It is suitable for mobile and portable
equipment, e-bike, motorcycles, electric wheelchairs, and so on.
★ The Renogy Battery Monitor is suitable for lithium batteries, lead acid batteries and
nickel-metal hydride batteries that have voltage from 10V to 120V.
★The Renogy Battery Monitor can't be exposed in the sun for a long time or in the
environment with large amounts of ultraviolet radiation when using or storing, in winter (＜
-10℃) and summer (>60℃) otherwise the life span of the LCD will be shortened.
Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.
Explosive battery gases may be present while charging. Be certain there is enough
ventilation to release the gases.
Be careful when working with large lead acid batteries. Wear eye protection and have
fresh water available in case there is contact with the battery acid.
It is the user’s responsibility to operate the equipment in a safe manner. Do not charge
batteries in an enclosed environment unless allowed by the manufacturer of the battery.
Never connect a load to a battery without using fuses or circuit breakers.
Please follow the battery manufacturer's safety instructions.
To Next Page
Loading...
Need help?
General
