Renogy PHOENIX 200 - Frequently Asked Questions

CIG Port Short-circuit
Protection
4.
DC Output Port Reverse
Current Protection
5.
powering those loads via the
DC Output Port or CIG Port.
All Battery Level LED Indicators
and the Ports Status LED
Indicator of USB-C Port flash
twice per second
USB-C Port Overcurrent
3.3A)
1. Remove the connection to the
USB-C Port
1.
All Battery Level LED Indicators
and the Port Status LED
Indicator of AC Outlets flash
twice per second
AC Outlets Overload Protection
1.
AC Outlets Short-circuit
Protection
2.
Inverter Over Temperature
Protection (Inverter
/95
3.
Remove all output connections.1.
If the AC Outlets were shorted,
remove the short circuit
immediately.
2.
If the loads drew power that
exceeds the specifications of
AC Outlets, stop powering
those loads via the AC Outlets.
3.
If the load drew a current that
exceeds the specifications of
USB-C Port, stop powering that
load via the USB-C Port.
3.
Press the Port On/Off Button to
turn on the USB-C Port again
and connect only the load that
conforms to the specifications
of USB-C Port to the unit.
4.
If the power source was
connected to the DC Output
Port, disconnect the power
source and recharge the unit via
the DC Input Port instead.
4.
Press the Port On/Off Button to
turn on the DC Output Port and
CIG Port again and connect
only the loads that conform to
the specifications of DC Output
Port and CIG Port to the unit.
5.
If the USB-C Port Port was
shorted, remove the short
circuit immediately.
2.
USB-C Port Short-circuit
Protection
2.
- 15 -