Renogy RMS-DCDC-US - Clear KWh to 0

25
1.Hold the Param. Setting
key for 2-3s until flashing
2.Use Up/Down keys to
highlight “USE” then Tap
Param. Setting key
3.Use Up/Down keys to
highlight boost voltage, then
Tap Param Setting key
4.Use Up/Down keys to
highlight float voltage, then
Tap Param Setting key
5.Use Up/Down keys to highlight
equalization voltage, then
Tap Param Setting key
6.Confirm setting by holding
Param. Setting key for 2-3s