EasyManuals Logo
Home>Reolink>Security Camera>Argus 2

Reolink Argus 2 Operational Instruction

Reolink Argus 2
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
1. Please click the “ ” button
in the top right corner to add the
camera.
2. Scan the QR code on the back
of the camera.
3. Click “Connect to Wi-Fi” to
configure the wifi settings.
NOTICE:
• Reolink Argus 2/Argus Pro
camera only supports 2.4 GHz
Wi-Fi. 5 GHz is not supported.
• Your family can click "Access
Camera" for live view after the
initial setup.
Download and install the Reolink App on App Store (for iOS) and Google Play (for Android).
Available on the
Get it on
Set up Camera on Reolink App (For Smartphone)
Please follow the prompt tones to configure the camera.
4. A QR code will be generated on the phone. Please place the QR code on your phone towards
Reolink Argus 2 or Pro camera’s lens at a distance of about 20cm (8 inches) to let the camera
scan the QR code. Please make sure that you’ve ripped the protection film of the camera’s lens.
5. Follow the steps to finish the WiFi settings.
6. After you created a password for your camera, please follow the steps to sync the time, and
then start live view or go to “Device Settings”
Add New Device
Device Settings
Menu
Access the Live View
Battery Status
Enable/Disable PIR
Motion Sensor
(In default, the PIR sensor
is enabled.)
20 cm ( 8 inches )
5English4 English
r
≈30cm(12 inch)

Other manuals for Reolink Argus 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink Argus 2 and is the answer not in the manual?

Reolink Argus 2 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWireless
Form factor-
WeatherproofYes
Mounting typeDesk/Wall
Product colorBlack, White
Protection featuresFreeze resistant, Heat resistant, Waterproof
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/2.8 \
Compatible memory cardsMicroSD (TransFlash)
Night vision distance10 m
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life0.5 year(s)
Battery voltage3.63 V
Battery capacity5200 mAh
Power source typeBattery
Battery technologyLithium
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-10 - 55 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 85 %
Mobile operating systems supportedAndroid, iOS
Number of cameras1
Detection angle120 °
Detection distance9 m
Security algorithmsWEP, WPA-PSK, WPA2-PSK
Weight and Dimensions IconWeight and Dimensions
Depth59 mm
Width65 mm
Height119 mm
Weight350 g

Related product manuals