EasyManuals Logo
Home>Reolink>Security Camera>Argus 2

Reolink Argus 2 Operational Instruction

Reolink Argus 2
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
1. Please charge the rechargeable battery with a standard and high-quality DC 5V or 9V battery
charger.
2. If you want to power the battery via the solar panel, please note that the battery is ONLY
compatible with Reolink Solar Panel. You cannot charge the battery with other solar panel brands.
3. Please charge the battery in temperatures between 0°C and 45°C.
4. Always use the battery in temperatures between -20°C and 60°C.
5. Please make sure the battery compartment is clean.
6. Please keep the USB charging port dry, clean and free of any debris and make sure the battery
contacts are aligned.
7. Always make sure the USB charging port is clean. Please cover the USB charging port with the
rubber plug after the battery has been fully charged.
8. Never charge, use or store the battery near any ignition sources, such as fire or heaters.
9. Always store the battery in a cool, dry and ventilated environment.
10. Never store the battery with any hazardous or combustible objects.
11. Do keep the battery away from children.
12. Do not short-circuit the battery by connecting wires or other metal objects to the positive (+) and
negative (-) terminals. Do NOT transport or store the battery with necklaces, hairpins or other metal
objects.
13. Do NOT disassemble, cut, puncture, short-circuit the battery, or make it dispose of in water, fire,
microwave ovens and pressure vessels.
14. Do NOT use the battery if it gives o an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any ways. If the battery is being used or charged, remove the battery from
the device or the charger immediately, and stop using it.
15. Always follow the local waste and recycle laws when throwing the used battery away.
Skin (for Argus 2)
Installation Guides
Step 1
Please dress the Reolink
Argus 2 camera with the skin
provided in the package.
Step 2
The skin has an anti-falling
safety rope. Please fasten the
other end of the rope to the
wall mount when mounting it
to the wall.
Step 3
Stick the camera on the wall
mount and twist the camera in
any direction.
Please dress the camera with the skin for better weatherproof performance when you install the
camera outdoors.
13English
12 English

Other manuals for Reolink Argus 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink Argus 2 and is the answer not in the manual?

Reolink Argus 2 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWireless
Form factor-
WeatherproofYes
Mounting typeDesk/Wall
Product colorBlack, White
Protection featuresFreeze resistant, Heat resistant, Waterproof
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/2.8 \
Compatible memory cardsMicroSD (TransFlash)
Night vision distance10 m
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life0.5 year(s)
Battery voltage3.63 V
Battery capacity5200 mAh
Power source typeBattery
Battery technologyLithium
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-10 - 55 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 85 %
Mobile operating systems supportedAndroid, iOS
Number of cameras1
Detection angle120 °
Detection distance9 m
Security algorithmsWEP, WPA-PSK, WPA2-PSK
Weight and Dimensions IconWeight and Dimensions
Depth59 mm
Width65 mm
Height119 mm
Weight350 g

Related product manuals