EasyManuals Logo
Home>Reolink>Security Camera>Argus 2

Reolink Argus 2 Operational Instruction

Reolink Argus 2
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
PIR Sensor Detecting Distance
NOTICE:
1. Path for adjusting distance in App: Device settings-PIR settings
2. Path for adjusting distance in Client: Device settings-RF Alarm
3. Higher sensitivity oers longer detecting distance, but it would lead to more false alarms. You
are advised to set up the sensitivity level to “Low” or “Mid” when you install the camera outdoors.
Sensitivity
Detecting Distance
(For moving and living things)
Detecting Distance
(For moving vehicles)
High
Mid
Low
Up to 9 meters (30ft)
Up to 6 meters (20ft)
Up to 4 meters (13ft) Up to 10 meters (33ft)
Up to 12 meters (40ft)
Up to 15 meters (50ft)
The PIR senor has 3 sensitivity levels for your adjustment: Low/Mid/High.
Higher sensitivity oers longer detecting distance. The default sensitivity of the PIR sensor is at
“Mid”.
!
To reduce false alarms, please note that:
Do not install the camera facing any objects with bright lights, including
sunshine, bright lamp lights, etc.
Do not place the camera too close to a place where there are frequently
moving vehicles. Based on our numerous tests, the recommended distance
between the camera and the vehicle is 15 meters (50ft).
Stay away from the outlets, including the air conditioner vents, humidifier
outlets, the heat transfer vents of projectors, etc.
Do not install the camera where there are strong winds.
Do not install the camera facing the mirror.
Keep the camera at least 1 meter away from any wireless devices,
including Wi-Fi routers and phones in order to avoid wireless interference.
Important Notes for Reducing
False Alarms
Attention for Camera Installation
9English
8 English

Other manuals for Reolink Argus 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink Argus 2 and is the answer not in the manual?

Reolink Argus 2 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWireless
Form factor-
WeatherproofYes
Mounting typeDesk/Wall
Product colorBlack, White
Protection featuresFreeze resistant, Heat resistant, Waterproof
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/2.8 \
Compatible memory cardsMicroSD (TransFlash)
Night vision distance10 m
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life0.5 year(s)
Battery voltage3.63 V
Battery capacity5200 mAh
Power source typeBattery
Battery technologyLithium
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-10 - 55 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 85 %
Mobile operating systems supportedAndroid, iOS
Number of cameras1
Detection angle120 °
Detection distance9 m
Security algorithmsWEP, WPA-PSK, WPA2-PSK
Weight and Dimensions IconWeight and Dimensions
Depth59 mm
Width65 mm
Height119 mm
Weight350 g

Related product manuals