Reolink Argus 2 User Manual

Reolink Wireless Battery-powered Camera
19
Install the Solar Panel
You may refer to the following steps to connect your Reolink solar-powered
cameras to a Reolink Solar Panel to get non-stop power.
1. Please select a position with the maximum sunlight exposure throughout the
year for your solar panel.
For Reolink Solar Panel, it only needs a few hours of direct sunlight exposure to
sufficiently power your camera daily. The amount of energy that the solar panel
can generate is affected by weather conditions, seasonal changes, geographic
locations, etc.
2. Mount the bracket with the mounting template and the screws provided in the
package.

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g