Reolink Argus 2 User Manual

Reolink Wireless Battery-powered Camera
51
Set up Motion Recording
When the camera detects a motion, it can record and save motion recordings to
SD card automatically. You need to install a SD card to the camera, refer to the part
of Install the Micro SD card in Chapter 7 about choose the correct SD card and
learn how to insert the SD card.
Set up Motion Recording
1.
Tap on . Then tap on Camera Recording, tap again to enable Camera
Recording.
2. Tap Schedule to set up a schedule when you want the camera to save motion
recordings, then tap Save. This is only applicable for Argus 3 Pro and you can also
choose the Detection Type: Person, Vehicle or Others.

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g