Reolink Argus 2 User Manual

Reolink Wireless Battery-powered Camera
11
Method 2: Directly connect the camera with the USB adapter via a USB cable and
plug it into the electrical outlet for charging & working.
Method 3: Charge the camera with Reolink Solar Panel (needs to be purchased
separately).
Note:
There is only one battery with each camera, but you can purchase more
at reolink.com or Reolink Amazon official stores.
There is a status LED under the micro USB port of the battery, which indicates the
battery charging status.
Set up the Camera on the App
Please follow the steps below to do initial setup for the battery-powered cameras
via Reolink App.
Step 1. Power on the camera and wait for it starting up. After hearing a startup
sound, you will hear repeated Ding sounds or "Please run Reolink App, add the
camera and set it up", which means you can scan the UID and start the setup
process.
Green LED
Fully charged
Orange LED
Charging

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g