Reolink Argus 2 User Manual

Reolink Wireless Battery-powered Camera
18
Attach the Camera to a Tree
Remove the Camera
Magnet (for Argus 2 only)
Thread the provided
strap to the mounting
plate.
Fasten the mounting
plate to a tree.
Follow the steps 3-5 in
the wall mounting to
finish installation.
Press the security mount
button to remove the
mount out.
Unscrew the camera from
the security mount.
Put up the skin,
provided in the packa
ge, for Reolink
Argus 2 camera.
There is an anti-falling
Safety rope. Please fasten
the other end of the rope
to the wall mount when
mounting it into a wall.
Stick the camera to the
wall mount and twist
the camera to adjust
direction.

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g