Reolink Argus 2 User Manual

Reolink Wireless Battery-powered Camera
2
The screenshot used in this user manual is based on model Arugs 3 Pro. The menu and
options of your model may be different, please refer to the actual page of your own model.
1. Camera Introduction
Device Overview
Argus 2/Argus Pro
A Rechargeable battery and Wi-Fi connectivity make the camera totally wire-free.
No network or power cable, no drilling and no outlets needed. Security is simple.
You can put it anywhere you want: on a shelf or a table; at the front door or back
door; from room to room, to keep an eye on the elderly, babies or pets. Or use it at a
temporary construction site, rental house or holiday house.
1
Daylight Sensor
2
6 PCS IR LEDs
3
Lens
4
Status LED
5
Built-in Mic
6
Built-in PIR Motion Sensor
7
Speaker
8
Wall Mount
9
Rechargeable Battery
10
Micro SD Card Slot
11
Reset Hole

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g