Reolink Argus 2 User Manual

Reolink Wireless Battery-powered Camera
35
Status LED
You can turn off the status LED if you don't want others to see it.
Note:
The status LED option is only available to Reolink battery-powered cameras. And it
has two working modes.
Standby Mode: The camera is in the power-saving mode; there is no live view
or video recording.
Working Mode: The camera is running at full capacity. It enters the working
status when someone is accessing the camera via Reolink software or the PIR
motion sensor detects movement.
Status LED
There is a LED light in the front of the camera which indicates the camera’s
different status.
Color
Meaning
Status
Red
Wi-Fi Connection failed
Blinking: Standby
On: Working
Blue
Wi-Fi Connection is successful
Blinking: Standby
On: Working

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g