Reolink E1 Series User Manual

How to Mount the Camera
Step 1
Drilling two screw holes
on the wall according to
the mounting hole
template.
Step 2
Insert the two plastic
anchors into the holes on
the wall.
Step 3
Secure the base unit in
place by tightening the
screws into the plastic
anchors.
Step 4
Align the camera with the
bracket, then turn the
camera unit clockwise
to lock it in position.
NOTICE:
1. Turn the camera
anticlockwise to remove
it from the wall.
2. In case your camera is
mounted upside down,
the picture will need to be
rotated as well. Please go
to Device Settings->
Display interface , then
click Rotation to adjust
the image.
10English
9 English

Reolink E1 Series Specifications

General

Pan & Tilt	355° pan, 50° tilt
Night Vision	Up to 40 ft (12m)
Two-Way Audio	Yes
Connectivity	Wi-Fi
Smart Alerts	Motion Detection/Person Detection
Storage	MicroSD card
Image Sensor	1/2.7" CMOS
Video Format	H.264
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA-PSK/WPA2-PSK
Operating Temperature	-10°C to 55°C (14°F to 131°F)