Reolink Go PT Plus User Manual

Now the initialization is finished and you can move it to the position you
want. Here is an article to choose a good position for the camera.
Install the Camera
We offer you guides on three different scenes in which the camera could be
installed. Check out them respectively.
Mount the Camera to the Wall
Step 1. Drill holes in accordance with the mounting hole template and screw the
security mount to the wall.
Note: Use the drywall anchors included in the package if needed.
Step 2. Screw the antenna to the camera.

Reolink Go PT Plus Specifications

General

Type	IP security camera
Remote viewing	Yes
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	Spherical
Mounting type	Wall
Product color	White
Tilt angle range	0 - 140 °
Angle of rotation	355 °
Sensor type	-
Number of lenses	1
LED type	IR
Night vision distance	10 m
Number of illumination LEDs	6
Total megapixels	4 MP
Maximum resolution	2048 x 1080 pixels
Audio system	2-way
4G standard	LTE
SIM card type	NanoSIM
Mobile network generation	4G
Power source type	Battery
Internal memory	32000 MB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB