Reolink Go PT Plus User Manual

Status Light
Note:
If the camera connects the network successfully
,
there will be no status LED light
up during idle mode.
Status Light
Camera Status
Red LED solid light up then starts to
flash
Camera cannot recognize the SIM
card or there is PIN code of the SIM
card.
Red LED solid light up then flash
slowly about once every second
Camera cannot register the mobile
carrier network.
1
Antenna
2
Battery Status LED
3
Micro USB Port
4
Power Switch
5
Reset Hole
6
Nano SIM Card Slot
7
microSD Card Slot

Reolink Go PT Plus Specifications

General

Type	IP security camera
Remote viewing	Yes
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	Spherical
Mounting type	Wall
Product color	White
Tilt angle range	0 - 140 °
Angle of rotation	355 °
Sensor type	-
Number of lenses	1
LED type	IR
Night vision distance	10 m
Number of illumination LEDs	6
Total megapixels	4 MP
Maximum resolution	2048 x 1080 pixels
Audio system	2-way
4G standard	LTE
SIM card type	NanoSIM
Mobile network generation	4G
Power source type	Battery
Internal memory	32000 MB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB