Name: Reolink Go PT Plus
Brand: Reolink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Red LED solid light up then flash

quickly about 3 times in 1s

Data call failed or requires to input

the APN.

Red LED solid light up then blue LED

starts to flash and goes off completely

Network connection failed.

Red LED solid light up then blue LED

starts to flash and solid light up

Network connection succeed.

2. Setup and Install

Set up the Camera

What’s in the Box

Note: The package content may vary and update with different version and

platforms, please take the below information only for a reference. And the actual

package content are subject to the latest information on the product selling page.

Go PT Plus

Activate the SIM Card for the Camera

The SIM card shall support WCDMA and FDD LTE.

Activate the card on your smartphone or with your network carrier before inserting

it into the camera.

Bracket *1

Surveillance Sticker*1

Pack of Screws*1

Reset Needle*1

Mounting Template *1

Go PT Plus*1

Quick Start Guide*1

USB Cable*1

Pre-installed 32GB

microSD Card*1

Questions and Answers:

Need help?

Do you have a question about the Reolink Go PT Plus and is the answer not in the manual?

Reolink Go PT Plus Specifications

General