Repotec UBI210 User Manual

1
Network USB over IP Server
With 1-USB2.0 Port
User Manual
V1.1

Repotec UBI210 Specifications

General

Ports	1 x USB 2.0
Network Interface	10/100Mbps Ethernet
Management	Web-based management
Power Supply	5V DC, 2A
Protocols	TCP/IP, LPR, IPP
Supported Operating Systems	Windows, Mac OS

Summary

Introduction to Network USB over IP Server

Product Overview

Provides a general overview of the Network USB over IP Servers' capabilities and purpose.

Network Management Features

Explains the WEB management feature for remote access and control of USB servers.

Components and Features

Lists the hardware components and technical features of the USB server device.

Hardware Installation Guide

Guides users through the physical setup and connection of the Network USB over IP Server.

Software Installation and Device Connection

Software Installation for Windows 2000/XP

Step-by-step guide for installing the server software on Windows 2000 and XP operating systems.

Connecting a USB Device to the Server

Procedure to connect and make USB devices available over the network using the server utility.

Connecting USB Printers and MFPs

Steps to connect and use USB printers or multi-functional devices with the network server.

Connecting USB Devices via USB HUB

Instructions on how to connect multiple USB devices using a USB HUB to the network server.

Disconnecting a USB Device

Explains how to properly disconnect a USB device from the server via the utility.

Requesting Device Disconnection

Describes the process to request another user to release a connected USB device.

Setting the Polling Interval

How to configure the refresh rate for device status updates in the setup utility.

Configuring Network Server Settings

Guides users on setting up server parameters like IP address, DHCP, and passwords.

Software Installation for Windows Vista

Detailed instructions for installing the server software on Windows Vista operating systems.

WEB Management Interface Operations

Accessing the WEB Management Interface

Guide on accessing the web interface for managing the USB server from a browser.

WEB Page Interface Description

Overview of the different sections and options available within the web management interface.

Status Information Display

Displays current server status, connected devices, and IP address information.

Setup Configuration Options

Allows modification of network settings, administrator passwords, and server parameters.

Miscellaneous Settings

Options for restoring factory defaults and upgrading the server firmware.

Restarting the USB Server

Procedure to reboot the Network USB over IP Server to apply changes or resolve issues.

Troubleshooting Common Issues

Frequently Asked Questions

Addresses common problems and provides solutions for connecting and using the USB server.