8
H5i technical specifications
Temperature Maximum heater plate temperature: 150°F (65°C)
Temperature cut-out: 165°F (74°C)
Maximum gas temperature: ≤ 106°F (≤ 41°C)
Physical Dimensions (L x W x H): 6.0" x 5.7" x 3.4" (153 mm x 145 mm x 86 mm)
Weight (water tub): Docking station and unfilled water tub 1.5 lb (670 g)
Weight (cleanable water tub): Docking station and unfilled water tub 1.7 lb
(770 g)
Water capacity: To maximum fill line 380 mL
Materials Docking station: Flame retardant engineering thermoplastic, aluminium
Cleanable water tub: Injection molded plastic, stainless steel and silicone seal
Water tub: Injection molded plastic, aluminium and thermoplastic elastomer
Air tubing technical specifications
Maximum
recommended
pressure
Air tubing Material Length Inner diameter
20 cm H
2
O ClimateLine heated air
tubing
Flexible plastic and
electrical
components
6’6” (2 m) 0.6” (15 mm)
SlimLine air tubing Flexible plastic 6’ (1.8 m) 0.6” (15 mm)
25 cm H
2
O Standard air tubing Flexible plastic 6’6” (2 m) 0.75” (19 mm)
3m air tubing Flexible plastic 9’10” (3 m) 0.6” (15 mm)
Heated tubing temperature cut-out: ≤ 106°F (≤ 41°C).
Notes:
• The manufacturer reserves the right to change these specifications without notice.
• The temperature and relative humidity settings displayed for ClimateLine are not measured
values.
• Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.
To Next Page
Loading...
Need help?
General
