DeltaSol
®
BS
© RESOL 08018 deltasol_bs.monen.indd
| 20
Distributed by:
RESOL-ElektronischeRegelungenGmbH
Heiskampstraße 10
45527 Hattingen / Germany
Tel.: +49 (0) 23 24 / 96 48 - 0
Fax: +49 (0) 23 24 / 96 48 - 755
www.resol.de
info@resol.de
6. Accessory
Overvoltage protection device
In order to avoid overvoltage damage at collector sensors
(e.g. caused by local lightning storms), we recommend in-
stalling the overvoltage protection RESOL SP1.
Sensors
Our product range includes high-precision platin tempe-
rature sensors, flatscrew sensors, outdoor temperature
sensors, indoor temperature sensors, cylindrical clip-on
sensors and irradiation sensors, also as complete sensors
with immersion sleeve.
Flowmeter
If you wish to carry out a heat quantity measurement,
you need a flowmeter for measuring the flow rate in your
system.
Please note:
The design and the specifications can be changed without prior notice.
The illustrations may differ from the original product.
Reprinting / copying
This mounting- and operation manual including all parts
is copyrighted. Another use outside the copyright re-
quires the approval of RESOL - Elektronische Regelungen
GmbH. This especially applies for copies, translations,
micro films and the storage into electronic systems.
Editor: RESOL - Elektronische Regelungen GmbH
Important notice:
We took a lot of care with the texts and drawings of this
manual and to the best of our knowledge and consent. As
faults can never be excluded, please note: Your own calcu-
lations and plans, under consideration of the current stan-
dards and DIN-directions should only be basis for your
projects. We don´t offer a guarantee for the completeness
of the drawings and texts of this manual - they only repre-
sent some examples. They can only be used at your own
risk. No liability is assumed for incorrect, incomplete or
false information and / or any resulting damages.