Need help?Do you have a question about the Resol TT1 and is the answer not in the manual?
General| Input Type | Pt1000 |
|---|---|
| Accuracy | ±1 °C |
| Housing | Plastic |
| Type | Temperature Controller |
| Outputs | 1 |
| Output Type | Relay |
| Power Supply | 230V AC |
Guidance and warnings for safe operation and installation, adhering to statutory provisions and regulations.
Silicone cable sensors for collectors, rated for -50°C to +180°C.
PVC cable sensors for stores, rated for -5°C to +80°C.
Sensors for immersion sleeves in various lengths and materials.
Sensors for pipe mounting with fastening collar.
Sensors for mounting on flat surfaces.
Recommendation for RESOL SP1 to prevent damage from lightning.
Step-by-step guide for physically installing the unit.
Details on wiring the power supply and sensors.
How to navigate menus and adjust settings using the physical buttons.
List of adjustable parameters and indication channels available.
Setting the switch-on temperature for heating/cooling.
Setting the switch-off temperature for heating/cooling.
Setting the delay time before switching on.
Setting the delay time before switching off.
Selecting between automatic, manual on, or manual off modes.
Interpreting LED status indicators for normal operation and errors.
Troubleshooting steps for power supply problems.
Identifying and resolving sensor faults using error codes and resistance checks.
To Next Page
