Content
Safety regulations ............................................................. 2
Tecnical data and function survey ................................... 3
1. Sensor types ........................................................... 4
2. Installation .............................................................. 5
2.1 Mounting................................................................. 5
2.2 Electrical connection ............................................. 5
3. Operating and function ......................................... 6
3.1 Pushbuttons for adjustment ................................. 6
3.2 Adjustment / controll channels ............................ 6
3.3 Adjustment channel TO ....................................... 7
3.4 Adjustment channel TF ........................................ 7
3.5 Adjustment channel DO ....................................... 7
3.6 Adjustment channel DF ........................................ 7
3.7 Adjustment channel MM ....................................... 7
3.8 Status-LED Blinkcodes .......................................... 7
4. Commisioning ........................................................ 8
5. Tips for fault location ............................................ 8
Security advice
Please pay attention to the following security advice in order
to avoid danger and damage to people and property.
Instructions
Attention should be paid
- to the statutory provisions for prevention of industrial
accidents,
- to the statutory provisions for environmental protection,
- to the Health and Safety at Work Act 1974
- to Part P of the Building Regulations 2005
- to BS7671 Requirements for electrical installations and
relevant safety regulations of DIN, EN, DVGW, TRGI, TRF
and VDE.
This instruction is exclusively addressed to authorised
skilled personnel.
- Only qualified electricians should carry out electrical
works.
- Initial installation should be effected by named qualified
personnel
Declaration of conformity
We, RESOL Elektronische Regelungen GmbH, D-45527
Hattingen, declare under our sole responsibility that our
product TT1 complies with the following standards:
EN 55 014-1
EN 60 730-1
According to the regulations of the above directives, the
product is labelled with
:
89/336/EWG
73/ 23/EWG
Hattingen, 07.07.2006
RESOL Elektronische Regelungen GmbH,
ppa. Gerald Neuse