To Next PageTo Next Page
Need help?Do you have a question about the Resol DeltaSol BS/2 and is the answer not in the manual?
General| Brand | Resol |
|---|---|
| Model | DeltaSol BS/2 |
| Category | Temperature Controller |
| Language | English |
Explains warning symbols, signal words, and provides safety instructions.
Defines intended use and confirms compliance with relevant directives (CE mark).
Identifies authorized skilled personnel for installation and operation.
Explains the meaning of symbols used in warnings and notes.
Specifications and technical parameters of the solar controller.
Instructions for physically attaching the controller to a wall.
Detailed guide for wiring the controller, including safety warnings.
Information on connecting the controller to external modules and networks.
Describes the setup for a standard solar system with one storage tank.
Explanation of the controller's 3 push buttons and their functions.
Visual representation of system components and their status on the display.
Details on system status indications and operating control LED states.
How to select the desired menu language for the controller.
Setting the display unit for temperatures (°C or °F).
Setting the maximum allowable temperature for the storage tank.
Adjusting the minimum speed for the pump.
Diagnosing and resolving sensor faults, broken, or short-circuited cables.
Troubleshooting steps for a permanently off operating LED and fuse replacement.
Description of various temperature sensors and measuring instruments available.
Recommends installing protection against overvoltage for collector sensors.
Information on SD3 Smart Display and GA3 Large Display modules.
Details on the AM1 Alarm Module for signaling system failures.
Information on the DL2 Datalogger for acquiring and storing system data.
Details on VBus® interface adapters for PC and network connectivity.
