Doc 0197030 rev. K
Page 7 of 28
Not subject to issue control when printed
Part List
Description Part No
INSERTION TOOL,S10A (incl mic filter) 17327300
INSERTION TOOL,S312 (incl mic filter) 17327900
PIN, Ø0.6 X 4.0 (bat door size10A) 16885400
PIN Ø0,60 X 4,50 (bat door size 312) 17010500
MULTI-TOOL (to separate HSG parts) 17327600
KIT, COLOUR MARKERS, SIZE10A 17294500
KIT, COLOUR MARKERS, SIZE312 17331900
Multi tool
(screwdriver/pin)
Insertion tool with mic filters in-
cluded - 5 tools in a blister pack
Colour marker kit
Note:
A new mic filter is introduced (stock of “old” filter can be used
up - p/n 16659100 FILTER, MIC). No change of function us-
ing the new filter. Smaller dierencies visually. This new filter
is not available as a separate part. Instead the INSERTION
TOOL must be ordered
To Next Page
