Smart Start
Smart Start delays the time before your hearing aid turns on after you remove the hearing aid from the charger.
With this function activated, you will hear a beep for each second of the delay period (either 5 or 10 seconds).
NOTE: If you do not want to use this function, ask your hearing care professional to deactivate it.
Adjusting the volume
Your hearing aid automatically adjusts the volume depending on your listening situation.
You can also adjust the volume by means of a ReSound remote control or the ReSound Smart 3D™ app.
When you change the volume, the hearing aid responds with a beep. When you reach the upper or lower limits,
the hearing aid responds with a low-pitched beep.
NOTE:
• If you have two hearing aids with the Synchronised Volume Control function enabled, volume control
adjustments to one hearing aid automatically repeat in the second hearing aid. When you change the
volume in one of the hearing aids, it responds with one or more beeps. A beep in the second hearing
aid follows.
Listening programs
Your hearing care professional can activate one or more listening programs in your hearing aids. These
programs can help you in specific situations. Ask your hearing care professional about which programs could be
useful for you.
Using your hearing aids 19
To Next Page
Loading...
Need help?
General
