Placing the Phone Now magnet
Place the magnet on your telephone receiver as follows:
1. Clean the surface thoroughly. Use a
recommended cleaning agent.
2. Remove the foil from the
magnet.
3. Place the magnet on the
phone.
CAUTION:
• If you experience frequent signal loss or noise during calls, move the Phone Now magnet to another
place on the telephone receiver.
• Only use magnets supplied by ReSound.
How to use Phone Now
1. Lift the telephone to your ear.
2. When you hear a short melody, the phone program is active.
24 Using your hearing aids
To Next Page
Loading...
