2. Insert the removal tip into the
used microphone filter and then
pull the tool straight out. It is
important to pull it straight and
not on an angle.
Inserting the new microphone filter
1. Insert the other end of the
tool (the end with the
replacement filter) into the
microphone opening.
2. Gently press the replacement filter
straight into the microphone opening
until the outer ring is flush with the
back of the hearing aid.
3. Pull the tool straight out – your
new microphone filter should
remain in place.
NOTE: Pressing on the new microphone filter with the flat side of the filter tool can ensure that the filter is
correctly in place.
44 Cleaning and caring for your hearing aids
To Next Page
Loading...
