10
Getting Started
Installing the TV Streamer 2
Depending on your TV, HiFi stereo, computer or other audio
setup, the installation of TV Streamer 2 may be done in several
ways described in the following section. The following steps will
guide you through the pairing and connecting process, which can
be easily accomplished by almost anyone. Start by connecting
cables between the TV Streamer 2 and the audio source and
finish by pairing the TV Streamer 2 to your hearing instruments.
i
The TV Streamer 2 supports both analogue and digital au-
dio input. Please read the following sections for information about
supported audio formats and how to connect the TV Streamer 2
to audio sources.
Connecting the TV Streamer 2 to an analogue audio source
(E.g. TV or HiFi stereo)
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on the TV Streamer 2
2. Insert the male stereo mini-jack on the audio cable into the fe-
male stereo mini-jack input on the TV Streamer 2 (4 on page 8)
3. Plug the other end audio cord into the ”AUDIO OUT” terminals
on the audio source
To Next Page
Loading...