12
Alternative analogue audio cable installations:
If it is not possible to connect the TV Streamer 2 to the AUDIO
OUTPUT of the audio source using the red and white plugs, the
following installation alternatives can be used:
Mini-jack adaptor:
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on TV Streamer 2
2. Insert the male stereo mini-jack on the audio cable into the fe-
male stereo mini-jack input on the TV Streamer 2 (4 on page 8)
3. Connect the stereo mini-jack adapter to the red and white
plugs at the other end of the audio cable
4. Plug the stereo mini-jack adapter into the audio sources’
”HEADPHONE” output terminal, or alternatively into your com-
puters’ audio terminal
i
Note: The HEADPHONE output terminal is usually located
on the side or front of the audio source. When using the HEAD-
PHONE terminal, usually only the person wearing the hearing in-
struments will hear the sound, and audio source speakers are
muted.
To Next Page
Loading...