16
Using the optical (Toslink) audio input
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on TV Streamer 2
2. Insert one of the plugs on the optical audio cable into the opti-
cal audio input socket (5 on page 8) on TV Streamer 2
Note: Most optical cables are delivered with a small protective
cap to protect the tip of the cable. Please remove this protec-
tive cap before inserting the cable
3. Plug the other end of the optical audio cable into the “Digital
Audio Out/Optical” on your audio source
To Next Page
Loading...