EasyManuals Logo

ReSound Unite 2 User Manual

ReSound Unite 2
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Restaurant
Restaurant
Restaurant
12 13
Adjust volume
Adjust volume on both hearing instruments
The “+” and “-“ keys are used to adjust volume
(6 and 7 on page 9). Volume may be adjusted
on both hearing instruments simultaneously or
on each side independently. By default, both
hearing instruments are “active” which is indi-
cated in the display by two arrowheads (< and
>) located next to the volume bars. Both hearing instruments can
simultaneously be made louder by pressing the “+” key or softer
by pressing the “-“ key. Each adjustment is accompanied by beep
tones in the hearing instruments, if not disabled by your hearing
care professional during the fitting, as well as a visual change in
the volume bars shown in the display. Default volume level is indi-
cated by a horizontal green line in the volume bars.
Adjust volume on the left hearing instrument only
To adjust volume on the left side only, first press
the “<” key on the keypad (8 on page 9). Doing
so will make the left hearing instrument “active”
and the right hearing instrument “inactive”. This
will be indicated by a left arrowhead (<) in the
display, with the right arrowhead turned off and
a dimmed volume bar on the right side. Now
press “+” or “-“ to adjust volume on the left hearing instrument
only.
Adjust volume on the right hearing instrument only
To adjust volume on the right side only, first
press the “>” key on the keypad (9 on page 9).
Doing so will make the right side “active” and
the left side “inactive”. This will be indicated by
a right arrowhead (>) in the display with the left
arrowhead turned off and a dimmed volume
bar at the left side. Now press “+” or “-“ to ad-
just volume on the right side only.
To return to simultaneous adjustment mode, press either the <
or > (8 or 9 on page 9) keys on the keypad until both arrowheads
appear in the display, indicating that both hearing instruments are
again “active”.
i
Note: If device-to-device synchronisation is enabled in your
hearing instruments, individual volume adjustment may be auto-
matically realigned across left and right hearing instrument.
Mute/Unmute (Not available with Alera hearing aids)
You can mute and unmute the hearing instrument microphones by
pressing the mute button (5 on page 8) on the Remote Control 2.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ReSound Unite 2 and is the answer not in the manual?

ReSound Unite 2 Specifications

General IconGeneral
BrandReSound
ModelUnite 2
CategoryRemote Control
LanguageEnglish

Related product manuals