Scan and answer the message of the other party. After the other party stops talking, you need to press the PTT key to respond within 3
seconds, otherwise the scanning will continue.
3. Press the PTT button within 3 seconds after the end of the transmission, you can talk.
4. Short press the PTT key to exit the scan.
Monitor
Monitoring is generally better when the other party’s signal in the current channel is poor or intermittently pressed. Short press the
button to turn on the monitoring function, and then press the button to turn it off.
Group call channel
The current receiving state of the walkie-talkie is dual watch mode: current channel mode and group call channel mode.
1.Press the key to transmit, the screen will display channel 16; the screen of the receiver will also display channel 16, press to
talk.
2.When the walkie-talkie is left unattended for 3 seconds, it will automatically exit the group call and return to the current channel, thus
avoiding miss key information and improve the communication efficiency of both parties in the call.
Note: Dual watch is turned on by default after the walkie-talkie is turned on, and it cannot be turned off. Press the PTT key to transmit on
the current channel, and press the key to transmit on the group call channel. Channel 16 is a fixed waiting channel and cannot be
changed.
Remove/recover channel CTCSS/DCS
Hold down the button and press the power button at the same time to restore the factory setting CTCSS/DCS.
Keyboard lock
Long press the key, the icon will be displayed on the screen, and the keyboard will be locked. After the keyboard is locked, only
PTT, can be operated, and then long press the key to unlock the operation.
Weather forecast (NOAA)
1. Press and hold the button, when NOAA is on, squelch is on, and the NOAA icon will be displayed on the screen
2. Short press the key to enter the weather forecast mode. Press or to change weather forecast (NOAA) Channel, long
press the up and down keys to quickly browse channels, and short press to start scanning channels.
3. In the weather forecast mode, short press the key and the current weather forecast channel is flashing, then short press
key OF is flashing, press the or key to turn on/off the weather forecast automatic warning.
4. Press the PTT button to confirm the weather forecast channel, and then press the PTT button to exit NOAA.
5. Channel talking is disabled in NOAA enabled mode.
Note: The weather forecast (NOAA) needs the support of the country or region where it is located.
Troubleshooting Guide
Question Solution
No power
Battery power doesn't last long after charging
Cannot chat with other members of the group
Other (non-group member) voices appear in the channel
The battery pack may be exhausted. Please replace the battery pack or
recharge it.
The battery pack may not be installed correctly, please remove it and install
it again.
The battery pack has reached the end of its life, please replace it with a new
one.
Make sure you are using the same frequency and CTCSS/DCS as other
members of the group.
Other members of the group may be too far away. Confirm that you are
within the effective range of other walkie-talkie.
Please change CTCSS/DCS settings, be sure to change the settings of all
walkie-talkie in the group.
MENU
LOCK
MENU
LOCK
Group
Group
Group
Group
MONI
SCAN
MONI
SCAN
4
CALL
NOAA
MENU
LOCK
MENU
LOCK
MENU
LOCK
To Next Page
Loading...
