How to fix Retevis RB67 Two-Way Radio when I cannot chat with group members?
To ensure seamless communication, verify that you're using the same frequency and CTCSS/DCS settings as other members of your group. Also, confirm that you are within the effective range of the other Retevis Two-Way Radios. Distance may prevent successful communication.
What to do if other voices appear on my Retevis RB67 Two-Way Radio channel?
If you're hearing voices from individuals who are not part of your group on your Retevis Two-Way Radio, try changing your CTCSS/DCS settings. Make sure to update these settings on all the Two-Way Radios within your group to maintain consistent communication.
Why Retevis RB67 Two-Way Radio has no power?
If your Retevis Two-Way Radio is not powering on, the battery pack may be exhausted. Try replacing or recharging the battery pack. If that doesn't work, remove the battery pack and reinstall it to ensure it's correctly connected.
Why Retevis Two-Way Radio battery power doesn't last long after charging?
If the battery power of your Retevis Two-Way Radio doesn't last long after charging, the battery pack may have reached the end of its life. Consider replacing it with a new one to restore optimal performance.
General| Channel Capacity | 16 |
|---|---|
| Antenna Impedance | 50Ω |
| Waterproof Rating | IP67 |
| Frequency Range | 400-470MHz |
| Battery Type | Li-ion |
| Weight | 220g (Include battery) |
| Maximum Deviation | ≤5kHz |
| Receiver Sensitivity | 0.2μV (12dB SINAD) |
| Working current | ≤1500mA |
Verify all included accessories are present in the package. Contact your dealer for missing or damaged items.
Use the specified adapter to charge the battery. A red light indicates charging, turning off when fully charged.
Short press the function key to access menu options. The menu auto-exits after 10 seconds of inactivity.
Enter channel selection mode, use navigation keys to switch channels, and press PTT to confirm.
Enter tone selection mode to choose CTCSS/DCS codes, use keys to browse, and press PTT to confirm.
Activate VOX function, select sensitivity level (1-3) using keys, and press PTT to confirm.
Enter setting mode to select call prompt tones using navigation keys, and press PTT to confirm.
Reference for 50 standard CTCSS frequencies and 109 DCS codes used for channel configuration.
Configure keyboard sound feedback and Roger beep notifications. Status indicated by icons on the LCD.
Properly hold the radio, press PTT to transmit, and release to receive signals.
Monitor battery status via icon and follow guidelines for battery maintenance and storage.
Initiate channel scanning or monitoring to find active transmissions or listen to current channel activity.
Understand group call functionality and how to lock/unlock the radio's keypad to prevent accidental input.
Access and use NOAA weather broadcasts. Select channels and set automatic warning alerts.
Consult this guide for solutions to common problems such as no power or battery issues.
Important information on safe usage, RF energy awareness, and compliance with regulatory standards.
Information regarding FCC, CE, and IC requirements and declarations for device operation.
Follow guidelines to avoid hazards like choking, ensure proper antenna use, and maintain safe distances.
Turn off the radio in hazardous environments, near medical equipment, or on aircraft as instructed.
Use appropriate volume levels and limit exposure time with headsets to prevent hearing damage.
Handle batteries with care to prevent short circuits and burns. Keep batteries away from children.
Do not use the charger in moist environments. Avoid disassembling the charger or operating damaged units.
Use only Retevis-supplied or designated accessories for compliance with RF exposure guidelines.
Table listing factory default channel numbers, frequencies (MHz), and power settings (High/Low).
Record model, serial number, dealer, and user information. Keep this card for warranty claims.
Details on the two-year manufacturer's warranty, how to claim service, and coverage exclusions.
To Next Page
