02
Charging The Battery
Battery Information
Please do not continue charging when the battery
is full-charged situation, otherwise will shorten the
lift of battery and reduce its feature.
Please use our company's official charger, and follow the steps
below to charge the battery.
1. Connect the charger to the power supply socket.
2. Install the battery or the transceiver with battery, then the light
turns red, indicating that the battery is being charged.
3. If the red light is off while the green light is on,this indicates-
that the battery is fully charged.
4. Unplug the charger from the power supply socket, and
remove the battery.
The battery is not fully charged in the factory, please charge it
before use.
charge the battery for the first time after purchase or extended
storage(more than 2month)may not bring the battery to its
normal operating capacity. After repeating fully charge/distance
cycle for two or three times，the operating capacity will reach
the best performance.
Notice
1. The ambient temperature should be between 5℃ and 40℃
while charging. If beyond this temperature, battery can not be
fully charged. So please prepare spare battery as backup during
cold weather. Do not throw away those batteries which can not
be usedat this time，they may be used in normal temperature.
2. When the battery contacts is dirty or stains, this will affect
thenormal use of the battery charging，Please wipe clean and
then start charge.
To Next Page
Loading...
