Retevis RT69 - Call Functions; Managing Call Types

50
DTMF-ST
RING
P33
1. DT-ST: opening keyboard
side tone when transmitting
2. ANI-ST: opening ANI code
side tone when transmitting
3. DT+ANI: opening the side
tone of keyboard and ID code
when transmitting
4. OFF: close function
press or
choose parameter
P40
The radio have1-10 levels,
each level 1 second
OFF: close the function
press or
choose parameter
PTT-DLY
P39
Delay time option:
100ms,200ms……3000ms
press or
choose parameter
PTT-ID
P39-40
BOT (beginning)
EOT (ending)
BOTH (beginning and ending)
press or
choose parameter
00000-99999, max 1000000),
make up ANI ID code together
ANI ID code: ID--XXX(3 bits) ID--XXXX(4 bits) ID--XXXXX(5bits) ID--XXXXXX(6bits)
Personal ID mark group number mark
(1~9,at most 9 group)
only one personal ID in group
Tips:
It must edit the different ANI ID code for each radio when they are use in group.
2. All call, select call, group call
The radio have the functions including ANI ID, Edit personal ID code, and DTMF decode, Without the aid of other
communication equipment, it can achieve the Communication operation including all call, group call and select call;
The ready work for communication of using all call, group call and select call: Editing ID.
The detail steps like below:
P32
ON/OFF
press or
choose parameter
ANI-SW
P31
1. QT
2. QT*DTMF (QT or DTMF)
3. QT+DTMF (QT and DTMF)
press or
choose parameter
SP-MUTE
P32-33
The radio code by the number
3-6 bits, 100-999999 option,
first bit non-zero.
press or
choose parameter
ANI-EDIT
49
1. Use private call, group call, all call, first of all, the frequency should be the same, there should be same CTCSS,
then press [MENU]+3
SAVE
1
STEP
to enter the SP-MUTE, and then press [MENU] to confirm the entry. Press the up
and down keys to select QT+FSK, and then press the [MENU] to confirm. This setting can be understood as
creating a group.
2. For private call, group call, all call, each call is within 15 seconds. If there is no call within 15 seconds, the
function is invalid. To use private call, group call, all call, you need to press function again.
3. Function [50] “Selective Call Group”: The number in the private call 001-100 represents the “Selected Call
Member” code. When the group calls, the 001-100 number represents the first digit of the “ID code” of the
walkie-talkie. The maximum number is 9 groups.
Tips: