Retsch GmbH 10
Protective equipment
The PM100 and PM200 are equipped with fixtures to automatically
close the cover. This prevents the devices being started in an
unsafe state.
The machines cannot be started unless the cover is closed.
It is only possible to open the cover when the machines are at
standstill.
Operating mode
S1
An operating mode with constant loading, the duration of which
suffices to reach the state of thermal rigidity. (DIN VDE 0530 T1)
Device dimensions
Height: Up to approx. 835 mm / Width: 630 mm / Depth : Up to
approx. 505 mm
Weight : PM100 net approx. 86 kg / PM200 net approx. 80 kg
Base area required
630 mm x 505 mm;
A safe distance of 200mm is required at the rear to allow the fan
to fulfil its function.
To Next Page
Loading...
